I bought an over the range GE microwave (model JVM3160) oven less than 4 years ago. It was a bear to install, so I was pretty disappointed this week when it started blowing the circuit breaker each time I tried to use it. I really didn’t want to have to install another oven. Fortunately, it turned out to be a defective door-closure switch and an infuriatingly bad design.
First, the design problem: microwave ovens have small electronic switches to detect whether the door is closed and prevent the oven from turning on if it is not (for safety reasons). Unbelievably, GE decided that blowing the fuse is a good way to prevent the oven from turning on. While that is technically true (it does stop the microwave), it’s a ridiculous way to do it since it gives no indication of what’s actually wrong and could create a much greater hazard if the home’s wiring, fuse, or circuit breaker were inadequate. Combine this with use of cheap switches that fail within a few years and I question whether I should ever buy another GE product.
Thank goodness for the internet because this turns out to be a common problem and others had figured it out. After disassembling the front panel (something you can do easily without removing the oven from the wall), I found that one of the three door detect micro-switches was indeed not working. I removed, repaired, and replaced the switch and the microwave works. I suspect the switch will fail again, but replacements are inexpensive and widely available so next time I’ll know what to do.
If you have a GE microwave that’s blowing fuses, and are comfortable with basic electronics, this youtube video explains clearly how to access the microwave’s electronics without removing the oven from the wall, how to test the switches, and how to remove the switch assembly for repair.
Update: the original switch did indeed fail again after a few months, so I replaced it with a new switch purchased on amazon here and the replacement has worked like a champ ever since.
Disclaimer: It should go without saying, but microwave ovens use high voltages; you should never open or work on any appliance without unplugging it and knowing what you are doing. Although it is not exposed in this repair, microwave ovens also contain a high voltage capacitor that retains a dangerous charge even when the oven is unplugged. If you don’t know what you’re doing, play it safe and call a repair professional.